HPL Plate Bonded Aluminium Honeycomb Wall Panel with Wood Frame
Edge for Wall Use
Product Description
HPL Plate Bonded Aluminium Honeycomb Wall Panel with Wood Frame
Edge for Wall Use is a type of fire prevention and environmental protection material
bonded aluminum honeycomb panel.
There are many different standards with regards to fire-resistant
and flame-retardant properties of pigh-pressure decorative
laminates. While different countries may have different standards
for the building industry to adhere to, most countries may agree on
some of the more common standards being used in the industry. Very
often, just like other standards applicable to the industry, the
tests may be European Standards with their equivalent in the US
Standards.
For example, many Commonwealth countries may be comfortable with
the British Standards 476 especially Parts 6 and 7, while there
will still be US Standard equivalence in the ASTM.
Features:
Ⅰlight weight, the volume density is small, about 211kg/m3, 1/13 of
the construction gypsum, 1/15 of the ordinary cement, 1/2 of the
normal honeycomb plate, and 1/2 of the lumber. For example, an 18mm
thick HPL honeycomb panel is only 3.8kg/m2.
Ⅱ High bending stiffness to weight. The 18mm thick HPL honeycomb
panel possesses the equivalent
bending stiffness to the 4mm thick aluminum plate also with large
plain compressive strength which can resist soft impact.
Ⅲ excellent flame retardant performance. HPL honeycomb panel is
backed with and aluminum honeycomb panel and attached with a HPL
panel with very limited combustible materials. According to GB
8624-2006, building materials and product combustion performance
rating, the panel can be graded as A2.
Ⅳ Cost-effective. With same performance as aluminum honeycomb
panel, but it is cheaper and lighter.
Specification: up to or less than 9000mm;1500 mm wide or less than;
4- 25 mm thick
General Description
Aluminum honeycomb panel is a bonded sandwich structure system of
two surface aluminium plates and one honeycomb cores with a special
purpose adhesive. Industrial used aluminium honeycomb panel will
add some more processes such as surface treatment, edging,
embedding, carving and so on to make the panel suitable for special
conditions. It has been widely used by the industries of civil
construction, transportation, exhibition, signage, elevator, clean
room etc. The honeycomb technology is from aerospace technology.
The whole production process is finished in the modern factory,
using hot pressing or vacuum pressing technology. Due to the high
thermal conductivity between the aluminum plates and honeycomb, it
is synchronized the thermal expansion and contraction of the inside
and outside aluminium material. There are small holes on the
honeycomb core foil wall so that the air is free of flowing inside
the panel box. Furthermore, sliding mounting buckle system does not
cause structural deformation during thermal expansion and
contraction.
Mechanical Properties
| ASTM | Unit | 10mm | 15mm | 20mm |
| Unit theory weight | | kg/m2 | 5.4 | 5.6 | 5.75 |
| Tensile strength | E8 | N/mm2 | 806 | 598 | 455 |
| Endurance capacity | E8 | N/mm2 | 531 | 405 | 279 |
| Elongation | E8 | % | 1.2 | 1.4 | 1.7 |
| Bending rigidity | C393 | X106N.mm2 | 8.03 | 15.4 | 38.44 |
| Bend elasticity rate | | N/mm2 | 50000 | 40600 | 38.44 |
| Temeprature total extension coefficient | D696 | X10-6N/℃ | 0.24 | 0.24 | 0.24 |
| Heat conduction rate | D976 | Kcal/mhr℃ | 0.23 | 0.19 | 0.15 |
| Heat transform temperature | D648 | ℃ | 200 | 200 | 200 |
| Bonding strength | C297 | | 12 | 12 | 12 |
| Surtace smoothness | 1mm/M.Maximum deviation:1mm/M |
| Flame retardabt property | Nonflammable,match relevant fire resistance standard |
| Soundproof function | Be decided by layout of printed sheet installation angle,0-3dB |
Application:
HPL Aluminum Honeycomb Wall Panel can be used in various wall
applications such as living house, office, partition, elevator,
ship and train compartment, etc
